[. . . ] ) to start or stop editing Press both buttons together ( a setting option. repeatedly to step through selectable states, or While editing, press or increase/decrease values. [. . . ] When `calc up' is «OFF» the IN-HULL calculates information for downhill movement only. Beep When beep is «ON» a beep will sound when the buttons are pushed. Set units (km/h) lets you set speed units to «km/h» or «mph» Distance and altitude are displayed in units corresponding to the speed units, i. e. if you choose «km/h» for speed units, then distance is displayed in «km» and altitude in «m». Set offset lets you adjust the IN-HULL to display local time The date is displayed to ensure that time adjustments are made in the correct direction, i. e. The IN-HULL automatically operates whenever you are moving and pauses operation while you are stationary. Modes are accessed in the following order: 2 3 AVG MAX 87 Speed Timer RCL RCL Speed AVG Timer Speed MAX Clock Odometer Altitude For details about modes see over page or consult User Guide. Mode example (speed) current speed session distance speed mode icon Mode icons appear in the lower section of the screen. While in Speed mode you can monitor session distance and current speed. While in Speed mode Press to store lap data Press and hold to clear all* session data Press to go to next mode (*Does not clear odometer) When you want to shut down the IN-HULL Press and hold Now you know IN-HULL LA000525B © 2005 Navman NZ Ltd. [. . . ] While in Speed mode Press to store lap data Press and hold to clear all* session data Press to go to next mode (*Does not clear odometer) When you want to shut down the IN-HULL Press and hold Now you know IN-HULL LA000525B © 2005 Navman NZ Ltd. [. . . ]